DIRECTIONAL - LED - 60in OUTLINER PERIMETER BAR - LEFT WIRE EXIT - 12VDC - DUAL-COLOR - BLUE/WHITE

ECCO ED3760BW-L — 60″ Dual-Color Directional LED Outliner / Perimeter Bar (Blue / White, Left Wire Exit, 12 V DC)

Elevate your vehicle's visibility with the ECCO ED3760BW-L, a full-length 60″ outliner / perimeter LED bar that delivers powerful dual-color directional performance. Designed to mount along running boards, push bumpers, or body edges, this bar emits both blue and white light in a single integrated unit. With 32 selectable dual-color flash patterns, steady-burn override, dimming options, and phase 1 / phase 2 sync capability, the ED3760BW-L brings flexibility, strength, and reliability to any upfit job.

Key Features & Specifications

• 60″ (61.3″ nominal) directional outliner / perimeter bar with dual-color output (“blue / white”)
• Left wire exit orientation for cleaner routing
• Supports 32 dual-color flash combinations, including steady-burn, color sequencing, and traffic advisory modes
• Separate wires provided for dim and steady-burn override features
• Rugged powder-coated aluminum housing with sealed light heads, IP67 rated for resistance to dust and moisture
• 55″ cable (jacketed) for reliable connection and flexibility
• Universal surface-mount design for flush installation on body panels, bumpers, or running boards
• Electrical: 12 V DC input, approx. 0.6 A draw under normal operation
• Certifications and approvals: SAE Class III, California Title 13, RoHS, with 5-year warranty

Why Choose ED3760BW-L?

• Combines blue and white directional lighting in one bar — no need for separate fixtures
• Long-span outliner bar enhances side visibility across the vehicle’s body
• High mode flexibility with 32 flash patterns including steady and dim override
• Sync capability lets it coordinate flashing with other directional modules
• Designed to endure harsh outdoor conditions — vibration, moisture, dust
• Ideal for emergency, fleet, utility, or service vehicles that need sleek, high-visibility edge lighting

Typical Applications

• Outliner / perimeter lighting on emergency / patrol vehicles
• Side-edge accent lighting for trucks, vans, trailers
• Forward / rear bumper accent lighting
• Retrofit installs where space is limited but full-length coverage is desired
• Supplemental directional bar lighting alongside main LED arrays

Installation Tips & Best Practices

• Mount on a clean, flat surface to ensure full light output without obstruction.
• Route the left-exit cable through a grommeted or sealed pass-through to maintain waterproofing.
• Use proper wire gauge and fuse protection close to the source.
• Ground securely to chassis to minimize flicker or electrical interference.
• Set and test your preferred flash pattern, override and dim mode before final installation.
• When using multiple bars or modules, follow ECCO’s recommended sync wiring layout.
• Periodically inspect lens clarity, mounting hardware, and wiring integrity during service checks.