DIRECTIONAL - LED - 72in OUTLINER PERIMETER BAR - RIGHT WIRE EXIT - 12VDC - DUAL-COLOR - BLUE/WHITE - RED/WHITE

ECCO ED3772BWRW-R — 73.3″ Quad-Color Directional Outliner LED Bar (Blue/White + Red/White, Right-Wire Exit, 12 V, 1.1 A)

Bring unmatched perimeter visibility to your vehicle with the ECCO ED3772BWRW-R, a full-length 73.3″ directional outliner bar engineered for quad-color capability. This powerful LED bar produces both blue/white and red/white output modes in a single housing—ideal for flexible signaling and warning applications. With a right-wire exit, it’s optimized for clean wiring layouts on the driver’s side. Designed for standard 12 V DC systems, this unit draws approximately 1.1 A and supports 32 dual-color flash combinations, including steady-burn, color alternation, and traffic-advisor modes.

Built rugged for field use, the ED3772BWRW-R features a powder-coated aluminum frame, sealed lightheads, polycarbonate lenses, and full IP67 environmental protection against dust and moisture. It maintains all benefits of the ED3760/ED3772 series: universal surface-mount design, phase synchronization (Phase 1 / Phase 2), dimming and steady override wires, and ECCO’s 5-year no-hassle warranty.

Key Features & Specs

• Quad-color output: Blue / White + Red / White in one unit
• Bar length: 73.3″ (usable perimeter span)
• Wire exit: Right-side routing (right-wire exit variant)
• Operating voltage: 12 V DC; typical current draw ~1.1 A
• 32 dual-color flash combinations including steady-burn, alternation, traffic modes
• Supports multiple bar sync via Phase 1 / Phase 2 wiring
• Built with powder-coated aluminum housing, sealed LED heads, durable polycarbonate lens
• Rated IP67 for protection from dust and water ingress
• Universal surface-mount design for flush installation
• Includes wires for dimming and steady override modes
• Covered by ECCO’s 5-year no-hassle warranty

Applications & Advantages

• Ideal for emergency, fleet, or service vehicles that require both blue/white and red/white directional output
• Perimeter lighting on running boards, body edges, bumpers, or tailgates
• Retrofit or new builds where one bar must serve multiple color signaling roles
• Compatible with synchronized lighting setups across multiple directional modules
• Durable, low-maintenance construction built for harsh outdoor environments

Installation Tips

• Choose a flush, unobstructed surface for mounting to ensure full emission.
• Route the right-exit cable through grommets or sealed bushings to protect against chafing.
• Use adequate gauge wire and fuse near the power source for safe operation.
• Ground to a clean chassis point to avoid flicker or noise.
• Configure and test your desired flash modes before final installation.
• If using multiple bars, follow ECCO’s recommended sync wiring layout to maintain pattern alignment.
• Inspect lens, mounts, and wiring periodically, especially in high-vibration or weather-exposed applications.