DIRECTIONAL LED - DUAL COLOR - FLUSH MOUNT - 69 FLASH PATTERNS - 12-24VDC - RED/WHITE

ECCO ED9040RW — Hide-A-LED® Flush-Mount Dual-Color Directional LED (Red / White, 69 Flash Patterns, 12–24 V DC)

Elevate your vehicle’s lighting functionality with the ECCO ED9040RW, a sleek, discreet directional LED module that delivers dual-color output (red / white) in one compact flush-mount housing. Part of the ED9040 series, this module supports 69 flash patterns, synchronization capability, and broad 12–24 V DC compatibility. It is SAE Class I rated and built to provide a professional warning light footprint with minimal exterior bulk. Perfect for installations behind bumpers, panels, grilles, or trim surfaces, the ED9040RW lets you maintain clean styling without sacrificing directional warning performance.

Key Features & Specifications

• Dual-color directional output: red / white in one module
• Flush-mount design (also supports 1" hole mount in the ED9040 series)
• 69 selectable flash patterns for dynamic signaling
• Operates on 12–24 V DC systems
• SAE Class I directional rating for regulated directional usage
• Compact dimensions: ~1.5″ × 1.5″ × 6.25″ (H × W × L)
• Backed by ECCO’s 5-year warranty

Why Choose the ED9040RW?

• Enables both red and white directional modes in a single, flush-mount unit
• Minimal visual footprint while meeting directional output requirements
• Broad pattern selection and sync support for flexible configuration
• Compatible with both 12V and 24V vehicles — useful for mixed fleets
• Compact and discreet for maintaining clean vehicle aesthetics

Ideal Applications

• Embedded in bumpers, grilles, or body panels behind surfaces
• Side-edge / corner directional lighting on emergency or utility vehicles
• Retrofit upgrades to streamline or modernize warning lighting
• Supplemental directional modules alongside main lightbars

Installation Tips

• Prepare a flush mounting surface or hole (1") based on your preferred kit.
• Use a gasket or appropriate sealant to protect against moisture ingress.
• Route wiring through grommets or sealed bulkheads to prevent abrasion.
• Fuse the power lead close to the battery (follow ECCO’s recommended fuse sizing).
• Ground securely to a clean chassis point for stable operation.
• Cycle through all 69 patterns and test switching between red/white before finalizing mounting.
• If using multiple units, wire sync lines according to ECCO’s sync wiring diagram for coordinated flashing.